Activity

I have 3 Aerotech J350W reloads for the 38/720 hardware for sale. Original price was $70+. $60 each or 3 for $170, 2 for $115. I’ll be at MHM Saturday, Sunday and Monday. Email me if you’re interested – Eric…   Read more»

Wind, Wind, Wind. No high power. But many great flights.Thanks for all the great conversation.http://picasaweb.google.com/mshinn2001/050110Launch#

I hope to fly my ‘Mad Dog’ on a K500…If the sky is open.If not it will be an F and G & H day. That is fine. I’m ready tofly.

Guys, I have brought in a very broad slice of the Madcow product line. While I may only have 1-2 of some kits, I have 6-8 of some of the hotter sellers.I’m most geeked up about the glass products -…   Read more»

With the permission of the contest director (Joe Hinton) and the regional contest chair (Russ Anthony) , we are going to modify the events for the Pawnee regional scheduled for this weekend (May 1) because of inclement weather forcasted for…   Read more»

The weather near the ground looks marginal, with cool temperatures, 50% cloud cover, and winds around 13-15 mph. But the upper level winds are good, with very low wind speeds//squall.sfsu.edu/gif/jetstream_h48_00.gif

I will be towing the trailer to the North Site for May 1.I will tow it back if there are no takers for the return tow.Thanks Mike

Well, thanks to Sean S. showing me that it is easy to upload photos, I can finally share some of the photos I have collected on the day of and since then. Enjoy!ArtA steep turn back to the South and…   Read more»

Those who followed my rants during my employment search know that I ended up at Vaisala, a Finland-based company making weather measurement sensors and systems world-wide. One of the past projects (discontinued years ago) was a rocket-based radiosonde to measure…   Read more»

Those of you following the project Keith Packard and I have been collaborating on over the last couple years to develop an open source altimeter with integrated GPS and radio link may be interested to learn that we now have…   Read more»

We will have the Alpha Hybrid 54mm motor at the May launch – $15 including nitrous per flight. The motor is 54mm x 28″, 540I250. We’ll also have the 38mm and 54mm Skyripper Systems motors. 38mm Skyripper motors are $13…   Read more»

What size chute is every one using in thier Kestrel.I bought a 60″ chute and a 36″ chute. I guess I better put another layer of glass on the fins, cause that 60″ chute ” AINT GONA FIT”

On the Colorado Rocketry Calendar it begins on Friday the 28th and runs through Monday the 31st.On the side bar Launch Schedule it starts on Saturday the 29th?Clarification?

Hey everyone,Here is the tracking information on Little Blue Dawg. It starts out on line 250 as a reference. On line 256 motor lites. Line 258 were gone. Raven had a reading of 7401′ @ 554MPH which i think is…   Read more»

Thought you might enjoy this from Canadian Assoc RocketryHello Everyone,I just thought I’d post a quick update. I’m posting here rather than the CAR-ACF Forum as it will be of interest to many.I was at the CTI facility with Bob…   Read more»

I have a Raven and a PerfectFlite WD for deployment. I wanted to use two on the same sled within close proximity for redundancy.Is there an interference issue? Seems like a cool set up — both velocity and barometric based.Anyone…   Read more»

Does anyone happen to have any fiberglass sleeve that would fit a 5.5″ LOC tube. I only have about 1′ of the 5″ light from Soller and I ran out of my stock from Nick from Aerosleeves.I’m looking for 5-6′,…   Read more»

If the shuttle lands on orbit 223, it will go right over us a bit after 8 AM. From http://www.space.com/nightsky/space-shuttle-landing-skywatching-100418.htmlShould Discovery be waved off on this first attempt, a second attempt will be made on orbit 223. On this track,…   Read more»

I have an unused 8) Loki K350 for sale. $160 is the going rate, will let this one go at $150. Must be L2 or doing an L2 certification -Thanks,JW

Last week, I went through all of my rocketry links and came up GoDaddy empty on http://www.rocketrage.com? Did Carl go out of business? If so, crap.