I'm the process of doing my L3 and I need to borrow a 98 mm Aerotech or AMW case to check sizing and fit on my motor mount - a custom machined aluminum deal. Preferably it would be the Aerotech 98/10240 case or an AMW 98/11000 case. I could live with an AT 98/7680 case. I don't need the case to burn a motor or anything that could damage it - just to do some accurate measurements and make sure everything fits as it should. I will only need the case for a week or two at most.
If anyone can accomodate me, I would be grateful. I'll definitely be at the annual meeting on Saturday and would be happy to return it before the end of the month.
Warren
Warren, No Aerotech Cases here. Only snap ring hardware for me. I do have several 98mm cases. The outside spec is the same on all my cases. Be it Pro X hardware or what ever else I have. I do have the 98-1100 AMW case. Its what I used for my L3 so I went ahead and bought it. My smallest 98mm is a 2ft long case pro X.
I'd be interested in borrowing the 98/11000 case for a couple weeks to check fit, both diameter and length. Will return it by the Feb launch or direct to your home before then if desired.
Warren
No problems. I will bring it with me on Saturday. I assume you just need the case and no hardware.
Conway
Case and the outer split ring. I don't need the nozzle or internal snap rings. VERY much appreciated Conway.
Warren
Thrust ring is already installed on the case. got you covered there.
Latest Post: Hello World Our newest member: manuelageach965 Recent Posts Unread Posts
