edward

I think it would also be nice to have people GPS waypoint the landing points of their rockets. This coupled with weight, diameter and motor information could give us a good trend on where rockets are...

What does the NCR GSE terminate in? I've got all the fittings to connect to 38mm and 54mm SRS and those terminate into 1/8 NPT. What do I need to connect to the fill hose? Edward

Last launch I was out looking for a rocket and Jon Skuba's landed about 10' from me over the fence to the north. Since the wind was blowing it around I picked it up and brought it back. It would depe...

I've got a brand new never used Missileworks PET2 Timer. $50 is the price. Let me know if you want it and I can deliver to MHM. Edward

How full is the clubs tank? I'm planning hopefully 4 54mm flights on the SRS system and if all goes well a couple on the 38mm system. Edward

It is probably the air going over the fins. I know a BSD Thor will do that, even whistle if you get it going fast enough. Edward

Ranchers work extremely hard to put on a pound of meat. Making the cows run around will work that right off. I'd think that if we genetically altered cows to be legless that would solve that problem...

I've got a 3" PML coupler. The Hobby Town in Fort Collins didn't have any last I looked. Their selection was poor. You are welcome to the coupler. Edward

I'm going to look in my basement. I know I've got at least one. I'll post again tonight after I look. Edward

Here is what I'm going to fly for MHM. It is a 2.56 rocket with a 26" 54mm motor mount. It will be fed a diet of nitrous 🙂 I'm planning on flying SRS 38's, 54's and then Sunday as many Alpha Hybrid...

If you want to add a ring this is what I did on my L1/2 rocket. I wanted a 3/8 bulkhead so I took two pieces of 3/16. I used a rounding router bit and used it on one edge of each of the rings. When...

I use the surgical tubing method. I just wrap the wires around my eyenut and put the charge in the eye of the eyenut. That way it doesn't move around a whole lot or get pushed to one side. Always w...

There is a free-viewer on the NFPA website. I bought both 1125 and 1127 and now get bombarded by NFPA spam in my snail mail box. Edward

I use Well Nuts. You can get them at Ace Hardware. You just drill a hole, put these in and then turn. They are rubber and expand against your airframe and keep them in place. Edward

From what I've seen and heard, it works quite well. I really like the idea. I'm going to get one for when I fly with T-C and NCR on commercial days. Relatively speaking, it takes quite a bit of ven...