new2hpr

If we lived in an area with appreciable humidity, I'd be concerned. Water is about the only thing that will mess with BP. It should be fine. Then again, if you've got plenty, it'd be cheap insuranc...

Come on 6GXL Pro24! (in Imax propellant) -Ken

As long as you've got a good thick anodize, you shouldn't have to worry about incidental contact between the plug and the closure, because it will happen, even with perfect o-rings. You could take it ...

Especially since they're skids. I'd like to see that same launch with "traditional AMW" skids... 5,4,3,2,1,wait for it, wait for it, wait for it... -Ken

I think Tim used to carry M's, but not anymore. I think I still have a few. -Ken

Wow, how are you going to attach your harness to that eye on your fincan? That's tight, at least with anything but a stubby motor! -Ken

Do you "need" a drogue? No, probably not. But, depending on the weight of the motor, the weight of your av-bay, and the drag of the fins, it might help keep things falling in a stable manner, rather...

I don't have it on me, but the manual for the Astro 220 at Garmin's site has a table of all the frequencies & channels. -Ken

I worked with Vern briefly at my previous job. He's a VERY smart guy and not afraid to come up with his own solutions to problems. He combined a number of commercial off-the-shelf components for his...

Adrian_A It should be centering ring, just a typo. That's just Adrian's tag line. He rarely builds anything that isn't minimum diameter, thus the quote. Ken

I would second the suggestion on CA soak for paper/phenolic tubes. Also, if you go with a coat of epoxy, you could add graphite to the mix (I believe West Systems has an additive, but any graphite pow...

Depending upon the diameter, you might try using an electrician's fish tape, or even a coat hanger to get a lead through the eye. Then just pull the new shock cord through, tie a loop in the end, and...

I got my 3 DC20s off ebay, but haven't had a chance to check them out with someone's handheld. There was also one stubby antenna and some dog harnesses in the package if anyone wants those! So no, I ...

I've got one of the stubby antennas if anyone wants to try it out. -Ken

Tim, Did you find enough MW alts for your project? Never heard back from you on it. Let me know if you still need one more. -Ken