Steve Jensen

or parts of it. I seem to have had a malfunction with the lower booster section and ebay somewhere out there SE of the launch pad. Found the NC and tracker 900 yards to the SE. I think the lower se...

That looks really nice. You sure you want to fly it? Pretty impressive from a DIY perspective. I've ogled Mongoose kits, but I bet you were way more cost effective.

about just passing the Kevlar through the plug, tying it to a washer, and epoxying the whole thing in place. This would eliminate the eye bolt entirely. The only down side (assuming it would work), i...

I've snagged a few Estes kits to use as guides. I am also shooting for 2012. Now all I need is 12 feet of 8 inch dia fiberglass 😉

It's in the above forum. Hope this helps!

are not too distant to get our flying in. Kloudbusters is 9 hours out from Denver area. Come on Rain!

but for simplicity I like Perfectflite altimeters. I've had success with both. I like Adrian's for bigger projects where I use back up charges. His also generates cooler data. I am playing with his...

It appears to be on Sunday only per the Calendar. I am thinking of heading up, as I have a sneaking suspicion that we're in for a protracted dry spell on the Pawnee. Hope I'm wrong. I think we need ...

I learn from observation. Keep up the pictures. I really enjoy them.

Goes to show that politeness helps, as the rancher to the east, Nathan, actually found my rocket. He intercepted Mike and I as we were meandering around their private lands. We explained what we were...

Warren, I'd love to lend a hand and watch. I've read all our threads and a few referenced materials. However, nothing beats experience. I envision using this technique on fin cans initially. (I do...

and slowly working towards vacuum bagging. Thought I'd start with a vacuum pump. What's a decent pump and how much vacuum do you have to pull? I'll be using this predominantly to attach fins via fib...

Fully assembled, w/o collar , will fit in a 54mm G10 coupler. It's tight, but using the screws (beware, they're metric) to hold it in place is easy. I've drilled holes big enough to accommodate the s...

I usually bring mine with me. Just be sure to make a heads up post prior to launch. I'll even show you how the thing works. It is really simple and a lot of fun to boot.

I take it that it's from a source other than PR? If so, this is great. I will be ordering more bits and pieces from 3Dogs for certain.