Warren B. Musselman

Doug, are you digital yet or still using the old high-speed film cameras? I'm hoping to re-cert L3 at Octoberfest and it would be awesome to fly off your pad.

Nice to see someone finally stepped up to the plate and took over the web site. Nice work. Warren

If you're going to do Mach 2.3, I would coat the leading edges of the fins with Cotronics high temp epoxy after doing the layup with regular epoxy like Aeropoxy or West Systems. I personally use alumi...

Pistons rule for keeping things from scorching. I've had blow-by with chute protectors scorch a few, but I figure that is somewhat inevitable in the end.

The video was pretty clear. I picked up some 2oz cloth and 30 minute epoxy. I have an old fin can I'm going to do some practice on. I'm still wondering what vacuum bagging does for you. Seems like...

I've taught tip to tip to many folks in the club as well as vacuum bagging. I'm usually pretty available although I do work Saturdays. There are a couple articles here in the forums I've done on the p...

I'd be up for #2 if I can afford motors this year.

Carrying a quartered elk on your shoulders is a bit of a chore. W

I'm open minded as to diameter, motor size, etc. Just so long as everyone flies the same design and same motor. Personally, I'd go for a minimum diameter L2 project - say 54mm... and maybe a K185. Tha...

Altitude with fixed design and fixed motor. Everybody has the same rocket and uses the same motor. Similar to the old Single Shot Sweepstakes only with tight design restrictions as to length, diameter...

An alternative would be to build a rockoon... a helium balloon launched launch pad for something serious - at least 6" in diameter and O or P powered. The idea is to break the helium balloon altitude ...

As many have noticed, I've sort of fallen by the wayside as far as building and flying rockets have been concerned. I have a house I'm remodeling which pretty much satisfies my urge for building thing...

As I recall, that was an especially nice tip to tip job we did on that bird. Let me know how the flight goes since I won't be able to make it.

I wasn't thinking strippers... they've been boring since I was about 26.... Now Cubans, a decent homebrew, a nice bourbon and some good conversation over interesting topics... I'm there.

Oh god... total debauchery... Showers even....a bus, a trailer... I assume a kegerator would be a part of this event?